Home > Products > Commercial Ceiling Fans > PMSM Motor Ceiling Fans

Products Categories

16th Floor, Building 1, GuangdaWe Valley Phase 3, Songshan Lake High-tech Industrial Development Zone, DongGuan.

TEL: +86 138 0884 1447

MOBILE: +86 138 0884 1447

E-MAIL: info@industrialhvlsfan.com

Cooling Fan Factory

PMSM is a permanent magnet synchronous motor. The so-called permanent magnet refers to the addition of permanent magnets when manufacturing the rotor of the motor, so that the performance of the motor is further improved.

Send Inquiry

Superwing Series PMSM Motor HVLS fan

Cooling fan factory

Specification

Diameter(M)	7.3	6.1	5.5	4.9
Model	OM-PMSM-24	OM-PMSM-20	OM-PMSM-18	OM-PMSM-16
Voltage(V)	220V 1P	220V 1P	220V 1P	220V 1P
Current(A)	4.69	3.27	4.1	3.6
Speed Range(RPM)	10-55	10-60	10-65	10-75
Power(KW)	1.5	1.1	0.9	0.8
Air Volume(CMM)	15,000	13,200	12,500	11,800
Weight(KG)	121	115	112	109

Features

0.8-1.5 KW

----------------------------------------------------------------------------

Zero maintenance,lifetime warranty for components

----------------------------------------------------------------------------

16-24ft in fan diamter

----------------------------------------------------------------------------

Direct drive permarent magnet motor

--------------------------------------------------------------------

Designs

Maintenance free

The super-wing series PMSM motor adopts the principle of electromagnetic induction, double-bearing transmission, completely sealed and truly maintenance-free.

The motor is small and exquisite

The super-wing series mainframe is small and exquisite, the height of the main unit is only 0.36M, which greatly reduces the installation space requirements. Only 0.86M can install a "super wing" series fan.

Motor drive rate is greatly improved

The permanent magnet synchronous motor has a small current, and the stator copper consumption of the motor is smaller, so the efficiency is higher than that of the asynchronous motor, and the transmission rate is also higher. The motor efficiency of common asynchronous motors is 78%, the motor efficiency of the super-wing series PMSM motors is 86%, and the transmission efficiency of the entire motor is increased by 13.6%.

Adjustable speed range is larger

At present, the market has a common 7.3M diameter and fan blade type, the speed range is usually 20-50RPM, while the super wing series, based on the powerful PMSM power output system and control technology, the stepless speed range is extended to 10-52RPM, providing you with a wider range of comfort adjustments.

Low noise and ultra quiet

The Super-wing series uses the latest PMSM technology to reduce noise to 38.5db for the first time, truly low noise. The noise of the asynchronous motor deceleration machine mainly comes from the excitation noise of the motor casing and the friction of the gear of the reducer. The noise standard is usually about 45-50dBA.

Powerful wind ,big air volume

The super-wing series adopts the latest PMSM technology, low-speed high-torque drive motor, which can meet any torque recovery or auxiliary braking within the peak torque, eliminating the friction energy consumption of the gear reducer, and the maximum torque reaches 300N.m. The most powerful advantage of the Superwing series is its air volume, which reached 528,675CFM at full load, surpassing the market's common product air volume by 30%, which has been unanimously recognized by customers and highly evaluated by the market.

Thermal design

Efficient cooling system (heat dissipation surface area up to 2.16㎡), perfect solution to the contradiction between performance and heat in PMSM technology.

In the heat dissipation system, through the two methods of contact heat dissipation and radiation heat dissipation, the ingenious structural design selects the high-density alloy aluminum material of the high heat conduction system to achieve the perfect heat dissipation effect and ensure the longer life characteristics of the motor.

Customer Cases

PMSM big ceiling fans1